cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Air Conditioning and Heater Module Assembly Removal and Installation|Page 12004 > < Air Conditioning and Heater Module Assembly Removal and Installation|Page 12002
Page 2
background image

above the air distributor duct.

11. Remove the fasteners (3) retaining the auxiliary HVAC module to the vehicle.
12. Remove the auxiliary HVAC module (4) from the vehicle.

Installation Procedure

1. Install the auxiliary HVAC module assembly  (4) to the vehicle.
2. Install the 2 bolts (3) inside the vehicle in order to retain the auxiliary HVAC module to the vehicle.

3. Install the upper auxiliary air duct (1) to the air distributor duct. Install the fastener (5).
4. Connect the electrical connectors to the auxiliary HVAC module.
5. Install the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase)   (See: Body and

Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase))Rear
Quarter Trim Panel Replacement - Right Side (Extended Wheelbase)   (See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Rear Quarter Trim Panel Replacement - Right Side (Extended Wheelbase)).

6. Raise the vehicle.

Air Conditioning and Heater Module Assembly Removal and Installation|Page 12004 > < Air Conditioning and Heater Module Assembly Removal and Installation|Page 12002