Escalade ESV RWD V8-6.2L (2010)
5. Install the starter solenoid cable terminal (2) to the fuse stud.
6. Install the starter solenoid cable nut (1) to the fuse stud.
Tighten the nut to 15 Nm (11 lb ft).
7. Install the fuse cover.
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
175 Amp Mega Fuse Replacement (without TP2)
175 Amp Mega Fuse Replacement (without TP2)