cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

ABOUT US
Evaporative Emission System Hose/Pipe Replacement (2500 LWB - Intermediate)|Page 4812 > < Evaporative Emission System Hose/Pipe Replacement (2500 LWB - Intermediate)|Page 4810

Escalade ESV RWD V8-6.2L (2010)

Page 16
background image

1. Install the fuel/EVAP line bundle.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the fuel line bracket nuts.

Tighten the bolt to 18 Nm (13 lb ft).

3. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
4. Install the fuel line clip to the bracket on the automatic transmission.

Evaporative Emission System Hose/Pipe Replacement (2500 LWB - Intermediate)|Page 4812 > < Evaporative Emission System Hose/Pipe Replacement (2500 LWB - Intermediate)|Page 4810