Escalade ESV RWD V8-6.2L (2010)
117.3L (31 Gal) Tank))Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank) (See: Fuel Tank/Service and Repair/Removal and
Replacement/Fuel Tank Replacement (1500 SWB - 98.4L (26 Gal) Tank)).
Fuel Line Replacement - Chassis (1500 Series)
Fuel Line Replacement - Chassis (1500 Series)
Removal Procedure
Note: Clean all fuel and evaporative emission (EVAP) lines connections and surrounding areas prior to disconnecting the lines in order to avoid
possible fuel and/or EVAP system contamination.
1. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief (CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (CH-48027))Fuel Pressure Relief (Without CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure
Relief (Without CH-48027)).
2. Disconnect the engine evaporative emission (EVAP) line (1) quick connect fitting from the chassis EVAP line. Refer to Plastic Collar Quick
Connect Fitting Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
3. Disconnect the fuel feed line quick connect fitting (2) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
4. Cap the fuel rail and EVAP pipes.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
6. Unbolt and reposition the front propeller shaft. Refer to Front Propeller Shaft Replacement ().