Escalade ESV RWD V8-6.2L (2010)
1. Install the fuel/EVAP lines to the vehicle.
2. Install the fuel line bracket locator tab to the frame.
3. Install the fuel/EVAP line clips to the frame and crossmember.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the fuel line bracket bolt (3).
Tighten the bolt to 12 Nm (106 lb in).
5. Remove the caps from the fuel and EVAP lines.
6. Connect the chassis EVAP line quick connect fitting (4) to the fuel tank line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
7. Connect the fuel tank fuel feed line quick connect fitting (5) to the chassis line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
8. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
