Escalade ESV RWD V8-6.2L (2010)
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (CH-48027))Fuel Pressure Relief (Without CH-48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure
Relief (Without CH-48027)).
2. Disconnect the fuel feed pipe (2) quick connect fitting at the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
3. Disconnect the EVAP line (1) quick connect fitting from the chassis line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
4. Cap the fuel rail and EVAP line in order to prevent fuel/EVAP system contamination.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
6. Remove the fuel pipe bracket nut.
7. Remove the fuel pipe bracket from the bellhousing stud.
