Escalade ESV RWD V8-6.2L (2010)
*
Fuel tank fill hose clamp (6)
*
Fuel tank fill hose (7)
*
Fuel tank fill hose clamp (8)
*
Evaporative emission hose (9)
*
Evaporative emission hose clamp (10)
Assemble Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
*
Evaporative emission hose clamp (10)
Tighten the clamp to 2.5 Nm (22 lb in).
*
Evaporative emission hose (9)
*
Fuel tank fill hose clamp (8)
Tighten the clamp to 2.5 Nm (22 lb in).
*
Fuel tank fill hose (7)
*
Fuel tank fill hose clamp (6)
Tighten the clamp to 2.5 Nm (22 lb in).
*
Fuel tank fill pipe clip (5)
*
Fuel tank fill hose (4)
*
Fuel tank fill pipe housing (3)
*
Fuel tank fill pipe housing bolts (2)
Tighten the bolts to 2.3 Nm (20 lb in).
*
Fuel tank filler vent hose (1)
Installation Procedure