Escalade ESV RWD V8-6.2L (2010)
15. Install the battery current sensor (3) clip to the battery tray, if equipped with a battery current sensor.
16. Connect the engine harness electrical connector (1) to the battery current sensor.
17. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up
and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Resonator Outlet Duct
Replacement).
18. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery Negative Cable Disconnection
and Connection).
