Escalade V8-5.7L VIN R (2000)
1. Remove two-thirds of the brake fluid from the master cylinder.
2. Raise the vehicle. Support the vehicle with suitable safety stands. Refer to Vehicle Lifting.
3. Remove the tire and the wheel. Refer to Tire and Wheel Removal and Installation. Reinstall two lug nuts to retain rotor on K models below 3646.6
kg (8050 lbs.) GVW.
4. Compress the piston using adjustable pliers over the inboard lining tab and the caliper housing flange.
5. Remove the brake hose from the caliper by removing the inlet fitting bolt.
6. Remove the mounting bolts (1), (2).
7. Remove the bolt boots (1), (2).
8. Remove the caliper.
^
Inspect the inside of the caliper assembly for signs of fluid leakage. Refer to Brake Caliper Overhaul if any leakage is detected.
^
Remove the mounting bolt seals if they were used.
