Escalade V8-5.7L VIN R (2000)
1. Connect the SIR electrical connector.
2. Connect the CPA retainer to the SIR connector.
3. Install the SIR lead wire to the clip on the steering wheel.
4. Install the SIR lead wire to the clip on the inflator module.
5. Press the inflator module into the steering wheel firmly enough that the module engages and latches the notched pins in the leaf springs.
6. Rotate the steering wheel back into the straight position.
7. Enable the SIR system. Refer to Enabling the SIR System.
Inflator Module Handling and Scrapping
CAUTION: When you are carrying an undeployed inflator module:
^
Do not carry the inflator module by the wires or connector on the inflator module
^
Make sure the bag opening points away from you