Escalade V8-6.0L VIN N (2002)
Brake Fluid Pressure Sensor/Switch: Service and Repair
Brake Fluid Pressure Sensor Replacement
Brake Fluid Pressure Sensor Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the alien bolt (2) from the Brake Pressure Modulator Valve (BPMV) mounting bracket (3) located on the sensor side.
3. Raise the BPMV to access the brake fluid pressure sensor.
4. Disconnect the electrical connector from the brake fluid pressure sensor.
Important: The replacement of the old brake fluid pressure sensor must be performed quickly to reduce the amount of fluid that is lost during the
procedure.
5. Use a wrench to keep the brake fluid pressure sensor collar from turning (1).
Remove the brake fluid pressure sensor (2) from the BPMV.
Installation Procedure