Escalade V8-6.0L VIN N (2002)
Valve Guide Seal: Service and Repair
Valve Stem Oil Seal and Valve Spring Replacement
-
Tools Required
-
J 22794 Spark Plug Port Adapter
-
J 38606 Valve Spring Compressor
-
J 42078 Valve Stem Oil Seal Installer
Removal Procedure
1. Remove the valve rocker arm.
2. Disconnect the spark plug wire at the spark plug.
-
Twist each plug wire boot 1/2 turn.
-
Pull only on the boot in order to remove the wire from the spark plug.
Important: Remove the spark plugs from the cylinder head with the engine at room temperature.
3. Loosen the spark plug 1 or 2 turns.
4. Brush or air blast away any dirt or debris from around the spark plug.
5. Remove the spark plug.