Escalade V8-6.0L VIN N (2002)
5. Connect the oxygen sensor electrical connectors (1, 2).
6. Connect the CPA retainers.
7. Install the muffler. Refer to Muffler Replacement (4.8L and 5.3L Engines) or Muffler Replacement (6.OL and 8.1. Engines).
8. Install the oil pan skid plate and bolts, if necessary.
-
Tighten the bolts to 20 Nm (15 ft. lbs.).
9. Install the engine shield and bolts, if necessary.
-
Tighten the bolts to 20 Nm (15 ft. lbs.).
10. Lower the vehicle.