Escalade V8-6.0L VIN N (2002)
License Plate Lamp: Service and Repair
License Lamp Replacement (Escalade EXT)
REMOVAL PROCEDURE
1. Remove the rear license plate attaching hardware from the rear bumper.
2. Remove the spare tire wheel hoist guide and retaining clip.
3. Remove the top fascia step pads.
4. Remove the center fascia step pads.
5. Remove the rear object sensors.
6. Remove the rear fascia from the bumper bar.
7. Release the lamp assembly tab from the rear fascia to remove.
8. Release the lamp socket by turning 1/4 turn counterclockwise.
9. Remove the lamp assembly from the vehicle.
INSTALLATION PROCEDURE