Escalade V8-6.0L VIN N (2002)
6. Disconnect the throttle position (TP) and intake air control (IAC) sensor harness connector.
7. Disconnect the crankcase ventilation hose from the throttle body.
8. Remove the throttle body attaching bolts.
9. Disconnect the coolant hoses from the throttle body.
10. Remove the throttle body and the gasket.
IMPORTANT: Do not reuse the throttle body gasket. Install a new gasket during assembly.
11. Discard the throttle body gasket.
12. Inspect the crankcase ventilation hose and the tube. Replace any damaged components.
INSTALLATION PROCEDURE