Escalade V8-6.0L VIN N (2002)
1. Install the inflatable restraint side impact module wiring harness (2) to the seat frame (3) while guiding the wiring harness (2) through the
appropriate spots on the seat frame (3).
2. Install the inflatable restraint side impact module wiring harness retaining clips to the seat frame.
3. Install the inflatable restraint side impact module (1) to the seat frame.
4. Install the inflatable restraint side impact module retainer.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the inflatable restraint side impact module retaining bolts (3).
Tighten
Use only hand tools to tighten the fasteners to 10 Nm (89 lb in).
6. Install the seat back cover.
7. Install the front seat.
8. Enable the SIR system.
Steering Wheel Inflator Module
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.