Escalade V8-6.0L VIN N (2002)
Tie Rod: Service and Repair
Tie Rod Replacement
Tools Required
^
J24319-B Universal Steering Linkage Puller
^
J29193 Steering Linkage Installer-12 mm
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
Important: Use the J24319-B in order to separate all the tie rods and ball joints.
2. Remove the nut (2) from the outer tie rod ball stud (3).
3. Use the J24319-B in order to remove the outer tie rod ball stud from the steering knuckle.
Important: Do not reuse the nut.
4. Remove the tie rod end from the shaft by loosening the jam nut.