Escalade 4WD V8-6.0L Hybrid (2011)
7. Remove the generator control module 3 phase cable clip nut (1).
8. Remove the generator control module 3 phase cable clip from the engine bracket (2).
9. Reposition the generator control module 3 phase cables out of the way.
10. Remove the right wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side.
11. Working through the wheel opening, remove the engine bracket bolts (2).
12. Lower the vehicle.
13. Remove the engine bracket nut (1) from the ignition coil bracket stud and remove the bracket (3).
