Escalade AWD V8-6.0L Hybrid (2010)
equivalent.
Note:
*
If installing the original brake pads and spring clips, mark the position of the brake pads and spring clips for proper installation.
*
If installing new brake pads, install new pad spring clips. Do not reuse the old pad spring clips with new brake pads.
10. Remove the brake pads (3) and spring clips (4) from the mounting bracket (5).
11. Thoroughly clean the pad hardware mating surfaces of the caliper bracket of any corrosion or debris with denatured alcohol and allow to dry.
Note: Use care when cleaning the brake caliper pistons to avoid damaging the piston dust seals.
12. If installing new brake pads, thoroughly clean the brake caliper piston faces and caliper housing to brake pad contact surfaces of all disc brake pad
insulator adhesive residue with denatured alcohol and allow to dry.
Installation Procedure
1. Apply a very thin coating of high temperature silicone brake lubricant to the pad hardware mating surfaces of the caliper bracket only.
2. Install the spring clips (4) on the caliper mounting bracket (5).
3. If installing new brake pads, remove the adhesive backing paper from the disc brake pad insulators.
Note: If installing the original brake pads, note the locations marked prior to removal.
4. Install the brake pads (3).
5. Remove the mechanics wire and rotate the brake caliper (2) into position on the mounting bracket (5).
6. Install NEW caliper guide pin bolts.
