Escalade AWD V8-6.0L Hybrid (2010)
Actuator: Service and Repair
Front Drive Axle Actuator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the front differential carrier shield, if equipped. Refer to Shield Replacement (See: Differential Assembly/Service and Repair).
3. Disconnect the electrical connector from the actuator.
4. Remove the actuator (1) for the 8.25 inch axle (2) or (3) for the 9.5 inch axle (4) by turning the actuator counterclockwise.
Installation Procedure
1. Apply sealant to the threads of the actuator (1) for the 8.25 inch axle (2) or (3) for the 9.25 inch axle (4). Use the correct sealant. Refer to
Adhesives, Fluids, Lubricants, and Sealers (See: Differential Assembly/Specifications/Fluid Type Specifications/Front Drive Axle).
