Escalade AWD V8-6.0L Hybrid (2010)
16. If reusing the old oil pan remove the old oil filter and install a NEW oil filter.
17. Lubricate the NEW oil filter seal with clean engine oil.
18. Install the NEW oil filter (437).
Tighten the oil filter to 30 Nm (22 lb ft).
19. Install the oil pan drain plug (430).
Tighten the drain plug to 25 Nm (18 lb ft).
20. Raise the steering rack in place and install the steering rack bolts.
*
Tighten the left side steering rack bolts to 200 Nm (148 lb ft).
*
Tighten the right side steering rack bolts to 100 Nm (74 lb ft).
21. Install the engine shield. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair/Engine Shield
