Escalade AWD V8-6.0L Hybrid (2010)
Tighten the bolts/nuts to 10 Nm (89 lb in).
8. Install the EVAP tube and purge solenoid.
9. Install the EVAP canister purge solenoid to the fuel rail bracket and engage the retainer.
10. Connect the EVAP tube quick connect fitting at the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
11. Lubricate the MAP sensor seal with clean engine oil.
12. Install the MAP sensor with a new seal.
13. Install the MAP sensor retainer.
