Escalade AWD V8-6.0L Hybrid (2010)
3. Install the starter through the wheel well opening.
4. Install the starter solenoid cable to the starter.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the starter solenoid cable nut (1).
Tighten the cable nut to 9 Nm (80 lb in).
6. Position the starter solenoid cable clip to the frame and install the starter solenoid cable clip bolt (2).
Tighten the clip bolt to 10 Nm (89 lb in).
