Escalade AWD V8-6.0L Hybrid (2010)
Installation Procedure
1. Install the power steering fluid cooler to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the power steering fluid cooler bolts (2) to the power steering fluid cooler (1).
Tighten the bolts to 9 Nm (80 lb in).
3. Connect the power steering fluid cooler hose (3) to the power steering pump (1).
4. Connect the power steering gear outlet hose (2) to the power steering fluid cooler (4).
5. Clean any excess fluid from the vehicle and remove the drain pans.
6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
7. Install the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement (See: Body and
Frame/Radiator Support/Service and Repair/Radiator Grille Reinforcement Support Replacement).
8. Install the fascia grille. Refer to Fascia Grille Replacement (Escalade) (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Fascia Grille/Fascia Grille Replacement (Escalade))Fascia Grille Replacement (Z71) (See: Body and
Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Fascia Grille/Fascia Grille Replacement (Z71))Fascia Grille
Replacement (GMC Denali XL) (See: Body and Frame/Grille/Service and Repair/Fascia Grille Replacement (GMC Denali XL))Fascia Grille
Replacement (Suburban, Tahoe) (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Fascia
Grille/Fascia Grille Replacement (Suburban, Tahoe))Fascia Grille Replacement (Yukon) (See: Body and Frame/Bumper/Front Bumper/Front
Bumper Cover / Fascia/Service and Repair/Fascia Grille/Fascia Grille Replacement (Yukon))Fascia Grille Replacement (GMC Yukon Hybrid 2
Mode) (See: Body and Frame/Grille/Service and Repair/Fascia Grille Replacement (GMC Yukon Hybrid 2 Mode)).
