Escalade AWD V8-6.0L Hybrid (2010)
10. Remove the steering gear bolts (1).
11. Remove the steering gear from the vehicle.
12. Transfer the pitman arm if necessary. Refer to Pitman Arm Replacement (See: Pitman Arm/Service and Repair).
Installation Procedure
1. Install the pitman arm if necessary. Refer to Pitman Arm Replacement (See: Pitman Arm/Service and Repair).
2. Position the steering gear in the vehicle.
Note: Start all of the steering gear bolts by hand and fully seat the bolts before finalizing the torque.
3. Install the steering gear bolts (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the steering gear bolts to 150 Nm (110 lb ft).