Escalade AWD V8-6.0L Hybrid (2010)
9. Turn the rear axle hub over and install the inner bearing cup.
10. Using the J 24427 - installer (2) and the J 8092 - handle (1), install the inner bearing cup into the wheel hub.
11. Install the inner bearing.
Note: Ensure the seal is fully seated in the hub bore.
12. Using the J 44420 - installer (2) and the J 8092 - handle (1), install the new oil seal.
13. Install the rear brake rotor, if necessary. Refer to Rear Brake Rotor Replacement (1500 Series) (See: Brakes and Traction Control/Disc Brake
System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement (1500 Series))Rear Brake Rotor
Replacement (2500 Series) (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Rear Brake Rotor Replacement (2500 Series)).
14. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.