Escalade AWD V8-6.0L Hybrid (2010)
Drive/Propeller Shaft: Service and Repair
Front Propeller Shaft Replacement
Front Propeller Shaft Replacement
Special Tools
J-43218 - Clamp Pliers - Narrow Jaw
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the transfer case shield, if equipped.
*
For vehicles equipped with the BW 4485-NR3 transfer case, refer to Transfer Case Shield Replacement (See: Transfer Case/Service and
Repair/Removal and Replacement/BW 4485-NR3 - Transfer Case/Transfer Case Shield Replacement).
*
For vehicles equipped with the MP 3023/3024-NQH transfer case, refer to Transfer Case Shield Replacement (See: Transfer Case/Service
and Repair/Removal and Replacement/MP 3010-NP0 - Transfer Case/Transfer Case Shield Replacement).
3. Remove the clamp (4) at the transfer case by prying up the exposed end of the clamp with a flat-bladed tool.