Escalade EXT V8-6.0L VIN N (2004)
Tighten the screws to 2 N.m (18 lb in).
3. Align the side trim panel to the floor console and connect the radio volume compensator microphone (2) electrical connector.
4. Install the electrical connector hold down clip to the floor console.
5. Align the trim panel to the floor console, push the panel towards the floor console to engage the panel clips.
6. Install the front console side panel screw (1).
Tighten the screws to 2 N.m (18 lb in).
7. Move the front seat fully forward.
8. Install the rear console side panel screw (2).
Tighten the retaining screw to 2 N.m (18 lb in).
9. Reposition the inboard seat track trim (1).
