Escalade EXT V8-6.0L VIN N (2004)
8. Remove the 3 fasteners under the license plate closeout (2).
9. Disconnect the fog lamp bulb electrical connector on the left and right side.
10. Remove the inside upper fog lamp fastener (1) on the left and right side.
11. Remove the left and right front wheelhouse liner retainers to get access to the fascia T-stud bracket.
12. Install the pop-in the clip onto the fascia T-stud bracket (1) with a flat-head screwdriver (2). Release the fascia T-stud bracket from the fender
T-stud.
13. Remove the front fascia from the vehicle.
Installation Procedure