Escalade EXT V8-6.0L VIN N (2004)
2. Position the cardboard panel to the seat back frame and install the panel fasteners.
3. Install the seat back trim cover.
Head Restraint Replacement
HEAD RESTRAINT REPLACEMENT
REMOVAL PROCEDURE
1. Pull the head restraint to the full height position.
2. Insert a pointed tool into the access hole (1) and press inwards.
3. Pull the head restraint from the seat.
INSTALLATION PROCEDURE
1. Install the head restraint by pushing down on restraint until the restraint is fully seated.
2. To ensure the head restraint is fully seated pull the head restraint up to the full upward position.The head restraint must not come off the restraint
rod.
Head Restraint Release Cable Replacement - Rear No. 1
HEAD RESTRAINT RELEASE CABLE REPLACEMENT - REAR NO. 1
REMOVAL PROCEDURE
1. Remove the seat back cover and pad.