Escalade EXT V8-6.0L VIN N (2004)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the oil level indicator.
2. Remove the oil level indicator tube bolt.
3. Remove the oil level indicator tube from the engine block.
Important: The O-ring seal may be reused if not cut or damaged.
4. Inspect the O-ring seal for cuts or damage.
5. Remove the O-ring seal from the tube, if required.
Installation Procedure
1. Lubricate the O-ring seal with clean engine oil.
