Escalade EXT V8-6.0L VIN N (2004)
![background image](/cadillac/escalade_ext/v8-6.0l_vin_n/Page-476003.png)
3. Install the screw that retains the switch panel bezel (1) to the front door panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 2 N.m (18 lb in).
4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming.