Escalade EXT V8-6.0L VIN N (2004)
![background image](/cadillac/escalade_ext/v8-6.0l_vin_n/Page-1584007.png)
6. Install the new pinion nut
7. Install the J 8614-01 onto the pinion yoke as shown.
Notice: Refer to Fastener Notice in Service Precautions.
8. Tighten the pinion nut while holding the J 8614-01.
^
Tighten the pinion nut to 370 Nm (273 ft. lbs.).
9. Install the propeller shaft to the rear axle pinion yoke.
11. Lower the vehicle.