Escalade EXT AWD V8-6.2L (2009)
Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank (2500 LWB - 43.5L (11.5 gal) Tank-Rear)
Removal Procedure
Important: Clean the evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the fittings in order to avoid
possible EVAP system contamination.
1. Remove the rear fuel tank. Refer to Fuel Tank Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) (See: Fuel Delivery and Air
Induction/Fuel Tank/Service and Repair)Fuel Tank Replacement (1500 LWB - 117.3L (31 gal) Tank ) (See: Fuel Delivery and Air
Induction/Fuel Tank/Service and Repair)Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank) (See: Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair)Fuel Tank Replacement (2500 LWB - 98.4L (26 gal) Tank Front) (See: Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair)Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) (See: Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair)Fuel Tank Replacement (2500 LWB - 4.35L (11.5 gal) Tank Rear) (See: Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair).
2. Remove the EVAP line from the clip (1) on the fuel tank.
3. Open the EVAP line clip (2) and remove the EVAP line from the clip.
4. Remove the EVAP lines from the clip (3).
5. Disconnect the EVAP line quick connect fittings from the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel
Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).