Escalade EXT AWD V8-6.2L (2009)
2. Connect the EVAP line quick connect fittings to the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery
and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
3. Install the EVAP lines to the clip (3).
4. Install the EVAP line to the clip (2) and close the clip.
5. Install the EVAP line to the clip (1) on the fuel tank.
6. Install the rear fuel tank. Refer to Fuel Tank Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) (See: Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair)Fuel Tank Replacement (1500 LWB - 117.3L (31 gal) Tank ) (See: Fuel Delivery and Air Induction/Fuel Tank/Service
and Repair)Fuel Tank Replacement (1500 SWB - 98.4L (26 gal) Tank) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair)Fuel
Tank Replacement (2500 LWB - 98.4L (26 gal) Tank Front) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair)Fuel Tank
Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair)Fuel Tank
Replacement (2500 LWB - 4.35L (11.5 gal) Tank Rear) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair).
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis (1500 Series)
Evaporative Emission Hose/Pipe Replacement - Chassis (1500 Series)
Removal Procedure
Note: Clean all fuel and evaporative emission (EVAP) lines connections and surrounding areas prior to disconnecting the lines in order to avoid
possible fuel and/or EVAP system contamination.