cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Metal Collar Quick Connect Fitting Service|Page 5649 > < Power Liftgate - Liftgate Open/Rear Access Open|Page 5644
Page 1
background image

Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service

Metal Collar Quick Connect Fitting Service

Special Tools

J 41769  Fuel Line Quick Disconnect Tool

Disconnect Procedure

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH-48027)   (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel

Pressure Relief (With CH-48027))Fuel Pressure Relief (Without CH-48027)   (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (Without CH-48027)).

2. Remove the fuel line retainer.

Warning

Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.

3. Using compressed air, blow any dirt or debris from around the connection.

4. Using the correct tool from the J 41769   , insert the tool into the female connector end, then push inward in order to release the quick connect

locking tabs.

Metal Collar Quick Connect Fitting Service|Page 5649 > < Power Liftgate - Liftgate Open/Rear Access Open|Page 5644