EFE Thermal Vacuum Switch Testing - Fleetwood V6-252 VIN 4 Emission Control
![background image](/cadillac/fleetwood/v6-252_4.1l_vin_4_4-bbl/Page-551001.png)
Thermal Vacuum Valve: Testing and Inspection
EGR Early Fuel Evaporation TVS
Below the switching point;
-
EFE and Manifold Vacuum ports should be open
-
EGR and Ported Vacuum ports should be opened and vented through the Vent port
-
Vent port should be blocked to the EFE port
Above the switching point;
-
Manifold Vacuum Port--Should be blocked
-
EFE port should be vented at the Vent port
-
EGR and Ported Vacuum ports should be open, while the Vent port is blocked at the EGR port.
NOTE: Refer to the number stamped on the base of the switch or valve for calibrated switching or activation temperatures.