Fleetwood V8-252 4.1L VIN 8 FI (1983)
IMPORTANT:
Improper installation of the electrical ground straps may affect vehicle performance. Special cam should be taken to insure
correct ground strap installation.
10.
Connect inlet and outlet hoses and electrical connectors to the A.I.R. management assembly.
11.
Install A.I.R. management assembly to its mounting bracket using a 13 mm socket wrench.
12.
Connect vacuum hose to the Thermal Vacuum Switch.
13.
Connect spark plug wires 2, 3, 4 and 8 to the distributor.
14.
Install the right sheet metal diagonal brace using a 13 mm socket wrench.
15.
Install air cleaner.
16.
Remove fender covers and close hood.
Upper Catalytic Converter A.I.R. Pipe (C/D Series)
FIGURE 4 - CATALYTIC CONVERTER A.I.R. PIPE
Removal (Figure 4)
1.
Open hood and cover fenders.
2.
Disconnect A.I.R. management hose at A.I.R. pipe.
3.
Raise vehicle.
4.
Disconnect A.I.R. hose from the upper pipe.
5.
Disconnect pipe from transmission mounting stud using a 15 mm socket wrench with a 3 inch extension, universal joint, and a long extension.
6.
Remove the upper A.I.R. pipe.
Installation (Figure 4)
1.
Install the upper A.I.R. pipe.
2.
Connect pipe to transmission mounting stud using a 15 mm socket wrench with a 3 inch extension, universal joint, and a long extension.
3.
Connect A.I.R. hose to the upper pipe.
4.
Lower vehicle.
5.
Connect A.I.R. management hose to the A.I.R. pipe.
6.
Remove fender covers and close hood.
Lower Catalytic Converter A.I.R. Pipe (C/D Series)