Fleetwood V8-350 5.7L DSL VIN N FI (1982)
Brake Caliper: Service and Repair
Caliper Removal
Fig. 2 Compressing piston and shoes with C-clamp
Fig. 3 Caliper & mounting bolts
1.
Siphon enough brake fluid out of the master cylinder to bring fluid level to 1/3 full to avoid fluid overflow when the caliper piston is pushed back
into its bore.
2.
Raise vehicle and remove front wheels.
3.
Using a C-clamp, as illustrated in Fig. 2, push piston back into its bore.
4.
Remove two mounting bolts, Fig. 3, and lift caliper away from disc.