Fleetwood V8-350 5.7L DSL VIN N FI (1982)
325-4L model "AJ" transmissions, proceed with the following steps prior to reassembly.
FIGURE 1 - ACCUMULATOR VALVE ASSEMBLY
4.
Remove the control valve body assembly. Remove the accumulator valve, bushing, and spring (refer to Figure 1, also refer to Figure 325-4L-228
in the 1983 SIM).
5.
Install a new design valve and bushing contained in service kit, P/N 8635969. When reassembling, be sure to position the bushing in the control
valve assembly with the square locator pin hole (refer to Figure 1, "Z") pointing up.
For warranty purposes, use labor Operation No. K6660 at 1.1 hours for THM 200-4R and 1.5 hours for THM 325-4L.
FIGURE 1 - ACCUMULATOR VALVE ASSEMBLY
FIGURE 2 - ACCUMULATOR VALVE
CONTROL VALVE ASSEMBLY WITH ACCUMULATOR VALVE TRAIN
A
Accumulator Valve
B
Accumulator Valve Bushing