Fleetwood V8-350 5.7L DSL VIN N FI (1982)
Output Shaft: Technical Service Bulletins
A/T - New Design Selective Washer for Internal Repairs
Bulletin No. T
83-113
File In Group
7
Number
83
Date
July '83
NEW DESIGN SELECTIVE WASHER 1981-1983 THM 200-C, 200-4R, AND 325-4L
Any time internal repairs are performed to the above listed transmissions, inspect the selective washer used to establish front (or input) unit end play for
wear or damage.
Beginning in late March, 1983, a new design selective washer went into production and is now available for service that is used on the following parts:
^
Turbine shaft to output shaft - THM 200-C
^
Forward clutch shaft to output shaft - THM 200-4R
^
Input shaft to output shaft - THM 325-4L
FIGURE 1 - NEW DESIGN SELECTIVE WASHER
These new service parts are made from a different material and can be identified by a raised portion on the identification tab as shown in Figure 1.
When servicing any THM 200-C, 200-4R, or 325-4L transmission that necessitates the replacement of the front (or input) unit selective washer due to
wear or damage, use the following service procedure:
SERVICE PROCEDURE
1.
Inspect the appropriate two shafts for wear or damage on the selective washer mating surfaces. If wear or damage is found, replace the necessary
shaft(s) to prevent future wear.
2.
Select the proper selective washer from the chart below:
SELECTIVE WASHER CHART (Front End Play)
Identification
Thickness (mm)
Thickness (in.)
Number
Color
Part Number
1.66 - 1.77
0.065 - 0.070
1
-
8639291
1.79 - 1.90
0.070 - 0.075
2
-
8639292
1.92 - 2.03
0.076 - 0.080
3
Black
8639293
2.05 - 2.16
0.081 - 0.085
4
Lt. Green
8639294
2.18 - 2.29
0.086 - 0.090
5
Scarlet
8639295
2.31 - 2.42
0.091 - 0.095
6
Purple
8639296
2.44 - 2.55
0.096 - 0.100
7
Cocoa Brown
8639297
2.57 - 2.68
0.101 - 0.106
8
Orange
8639298
2.70 - 2.81
0.106 - 0.111
9
Yellow
8639299
2.83 - 2.94
0.111 - 0.116
10
Lt. Blue
8639300
2.96 - 3.07
0.117 - 0.121
11
Blue
8639301
3.09 - 3.20
0.122 - 0.126
12
-
8639302
3.22 - 3.33
0.127 - 0.131
13
Pink
8639303
3.35 - 3.46
0.132 - 0.136
14
Green
8639304
3.48 - 3.59
0.137 - 0.141
15
Gray
8639305
3.
Check the front end play to verify the proper washer selection, following procedures outlined in your Service Manual. Front end play for THM