Fleetwood V8-368 6.0L VIN 9 FI (1982)
Wheels: All Technical Service Bulletins
Aluminum Wheel Weights - Revised
NO.: 90-I-65
DATE:
July, 1990
GROUP:
3E CORP. NO.: 003502
SUBJECT:
COATED WHEEL WEIGHTS FOR ALUMINUM WHEELS (NEW PARTS)
Vehicles with cast aluminum wheels use a coated clip-on wheel weight. The coating has recently changed from nylon to polyester giving an appearance
that more closely matches the wheel. Coated balance weights are used on both the inboard and outboard rim flanges. They will not discolor, corrode, or
damage the appearance of the wheel as may have been the case in the past with uncoated clip-on weights. These coated weights will fit most cast
aluminum wheels.
There are two types of coated wheel weights available to fit the vehicles. Both types of weights are available from GMSPO in 1/4 ounce increments. See
usage chart below to determine which type weight is correct for the vehicle.
Parts are currently available from GMSPO.
Dealers should make sure they have a supply of both types weights for balancing aluminum wheels.
When installing the coated weights, care must be taken so the coating does not crack. It is recommended that a Teflon-tipped hammer be used such as
85403 Nicholson Industrial Hammer, P/N CAS 3340551, available through the Charles Strelinger Company, Warren, MI (313-268-4100), or equivalent.
