Fleetwood V8-368 6.0L VIN 9 FI (1982)
Key: Technical Service Bulletins
Locks - Key Code Security Rules and Information
Bulletin No.: 10-00-89-010
Date: May 27, 2010
Subject: Key Code Security Rules and Information on GM KeyCode Look-Up Application (Canada Only)
2011 and Prior GM Passenger Cars and Trucks
2010 and Prior HUMMER H2, H3
2009 and Prior Saturn and Saab
2002 and Prior Isuzu
This bulletin has been created to address potential issues and questions regarding KeyCode security. This bulletin should be read by all parties involved
in KeyCode activity, including dealer operator, partner security coordinator, sales, service and parts departments. A copy of this bulletin should be
printed and maintained in the parts department for use as a reference.
U.S. dealers should refer to Corporate Bulletin Number 10-00-89-009.
Where Are Key Codes Located?
General Motors provides access to KeyCodes through three sources when a vehicle is delivered to a dealer. Vehicle KeyCodes are located on the
original vehicle invoice to the dealership. There is a small white bar coded tag sent with most new vehicles that also has the key code printed on it.
Dealerships should make a practice of comparing the tag's keycode numbers to the keycode listed on the invoice. Any discrepancy should be reported
immediately to the GM of Canada Key Code Inquiry Desk. Remember to remove the key tag prior to showing vehicles to potential customers. The third
source for Key codes is through the GM KeyCode Look-Up feature within the OEConnection D2DLink application. KeyCode Look-Up currently goes
back 17 previous model years from the current model year.
When a vehicle is received by the dealership, care should be taken to safeguard the original vehicle invoice and KeyCode tag provided with the vehicle.
Potential customers should not have access to the invoice or this KeyCode tag prior to the sale being completed. After a sale has been completed, the
KeyCode information belongs to the customer and General Motors.
Only the original invoice contains key code information, a re-printed invoice does not.
GM KeyCode Look-Up Application for GM of Canada Dealers
All dealers should review the General Motors of Canada KeyCode Look-Up Policies and Procedures (Service Policy & Procedures Manual Section 3.1.6
"Replacement of VIN plates & keys").
Please note that the KeyCode Access site is restricted. Only authorized users should be using this application. Please see your Parts Manager for site
authorized users. KeyCode Look-Up currently goes back 17 years from current model year.
Important notes about security:
Users may not access the system from multiple computers simultaneously.
Users may only request one KeyCode at a time.
KeyCode information will only be available on the screen for 2 minutes.
Each user is personally responsible for maintaining and protecting their password.
Never share your password with others.
User Id's are suspended after 6 consecutive failed attempts.
User Id's are disabled if not used for 90 days.
Processes must be in place for regular dealership reviews.
The Parts Manager (or assigned management) must have processes in place for employee termination or life change events. Upon termination
individuals access must be turned off immediately and access should be re-evaluated upon any position changes within the dealership.
If you think your password or ID security has been breached, contact Dealer Systems Support at 1-800-265-0573.