Fleetwood V8-368 6.0L VIN 9 FI (1982)
Seals and Gaskets: All Technical Service Bulletins
A/T - New Transmission Oil Pan, Gasket and Bolts
Bulletin No. T
84-69
File In Group
7
Number
100
Date
Apr. '84
SUBJECT:
NEW TRANSMISSION OIL PAN, GASKET AND BOLTS - THM 200-4R
MODELS AFFECTED:
1981-1984 DEVILLE AND BROUGHAM
FIGURE 1 - TRANSMISSION OIL PAN
FIGURE 2 - HEX HEAD SCREW AND CONICAL WASHER ASSEMBLY
Beginning in early January, 1984, all 1984 Deville and Brougham models equipped with THM 200-4R transmissions have a new transmission oil pan
(Figure 1), composition cork gasket and special hex head bolts with conical washers (Figure 2). These new parts are used to reduce the possibility of
transmission fluid leaks in the oil pan area and are similar to the part changes previously made to THM 325-4L, 125C and 200C transmissions.
When servicing any 1981 through 1984 Deville or Brougham model equipped with a THM 200-4R transmission for fluid leaks in the oil pan area, follow
the listed service procedures and parts information furnished in this bulletin.
Service Procedures
1.
Diagnose source of the transmission fluid leak to be certain it is from the oil pan area.
2.
Visually inspect the oil pan and bolts to determine if the new parts have been used (transmissions built after I.D. numbers 003 IT 84 AA 0001 or
003 IT 840M 0001 should have the new parts).
3.
Refer to Section 7A of the Service Information Manual for proper removal and installation procedures of the affected parts.
