Fleetwood V8-57L VIN P (1994) Circuit Breaker Diagram | Page 1244
Fig. 5 Double Wire Feed Fusible Link
To replace a damaged fusible link, Fig. 4, cut it off beyond the splice. Replace with a repair link. When connecting the repair link, strip wire and
use staking-type pliers to crimp the splice securely in two places. For more details on splicing procedures, refer to Typical Electrical Repair,
under Diagnostic Aids, Connector and Terminal Repair. See: Diagrams/Diagnostic Aids
To replace a damaged fusible link which feeds two harness wires, cut them both off beyond the splice. Use two repair links, one spliced to each
harness wire, Fig. 5.
Relays & Diodes
Non-Relay Circuit
Relay Circuit
RELAYS
Battery and load location may require that a switch be placed some distance from either component. This means a longer wire and a higher voltage
drop. The installation of a relay between the battery and the load reduces the voltage drop, because the switch controls the relay, the switch can be