Fleetwood Brougham V8-252 4.1L (1985)
FIGURE 3 - MATCH MOUNTING THE WHEEL LOW POINT WITH THE TIRE HIGH POINT
Mount new tires aligning the yellow mark on the tire with the valve stem on the wheel (see Figure 3). Balance and install on non-drive axle positions.
Check alignment of non-drive axle and reset as necessary; see new alignment specifications in this bulletin. Both before and after alignment
measurements must be recorded on the R.O. Stress the importance of regular tire rotation and proper inflation pressures to the customer.
Revised Fleetwood Brougham Front Alignment Specifications
Toe:
Per Wheel .06~ +/- .05~
Sum
.12~ +/- .10~
Camber:
.25~ +/- .25~
Caster:
3.00~ +/- .50~
Revised Eldorado and Seville Rear Alignment Specifications
Toe:
Sum .10~ +/- .10~
For warranty purposes, use one of the following labor Operations:
FAILURE
LABOR
LABOR
NET
DESCRIPTION
CODE
OPERATION
HOURS
ITEM
^
Rotate tires using modified 06 T-6151 * -- X rotation (includes lock nuts) and align front or rear suspension
*
Fleetwood Brougham (front suspension) 1.4 Hrs.
Eldorado and Seville (rear suspension)
1.2 Hrs.
^
Mount and balance two tires 06 T-6150 ** *** (includes lock nuts) and align front or rear suspension
*
* Fleetwood Brougham (front suspension) 1.7 Hrs.
Eldorado and Seville (rear suspension)
1.5 Hrs.
Dealers are eligible for .2 administrative allowance as "other labor hours" if tires are replaced.
*
* * The Uniroyal tire invoice amount should be entered as a net item on the warranty claim.
Technical Service Bulletin # 8649A
Date: 860501
Tire - Irregular Wear
Bulletin No.
86-49A
File in Group
3E
Number
23
Corp. Ref. No. 806 0509-5
Date
May '86
SUBJECT:
IRREGULAR TIRE WEAR
MODELS AFFECTED: 1985-1986 FLEETWOOD BROUGHAM AND 1985 ELDORADO AND SEVILLE WITH ALL SEASON TIRES
This bulletin supersedes Serviceman Bulletin T-86-49, Group 3E, which should be destroyed. The labor operation originally listed as T6149 has been
changed to T6151.
Condition