Fleetwood FWD V6-260 4.3L DSL (1985)
10.
Install wheel and tire assembly.
11.
Raise car. Remove jack stand.
12.
Lower car.
13.
Pressurize the air adjustable rear struts by grounding the yellow test lead at the ELC compressor. Allow compressor to run for approximately
15 seconds. This ensures that the strut air sleeves are filled with residual pressure.
The following operations and time allowances should be used when submitting warranty claims for repairs described above:
Failure
Operation
Description
Hours
Code
E5580
Ball Joint, Rear Control Arm,
.9
40
Right - Replace
E5581
Ball Joint, Rear Control Arm,
.9
40
Left - Replace
E5747
Mount, Rear Strut, Both -
1.3
40
Replace