Fleetwood FWD V8-252 4.1L (1986)
2.
Disconnect the A.I.R. hose from the converter.
FIGURE 2
3.
Using tool J-35976, BT-8252 or equivalent, cut the intermediate pipe at the converter, as close to the weld as possible (see Figure 2).
4.
De Ville/Fleetwood - Cut the exhaust pipe at the converter as close to the weld as possible (see Figure 2).
Eldorado/Seville - Remove the two bolts and springs from the exhaust pipe to converter flange.
5.
Remove the catalytic converter (and seal on Eldorado/Seville).
6.
Collapse and remove the portion of the catalytic converter inlet/outlet remaining in the intermediate pipe (and exhaust pipe on De
Ville/Fleetwood).
7.
Install the new catalytic converter. The converter inlet/outlet will fit inside the existing pipes.
8.
Eldorado/Seville - Install a new exhaust pipe to converter seal, P/N 1633384. Install the exhaust pipe to converter flange bolts/springs and
torque to 20 N-m (15 ft.lbs.).
De Ville/Fleetwood - Install a guillotine-type clamp, P/N 15595048, at the exhaust pipe to converter fitting. Torque to 35 N-m (26 ft.lbs.).
9.
Install a guillotine-type clamp, P/N 15595048 (except C-touring use 3634476), at the intermediate pipe to converter fitting. Torque to 35 N-m (26
ft.lbs.).
10.
Reconnect the A.I.R. hose, lower vehicle, start engine and check for exhaust leaks.
PARTS LIST
Part Name
Model
P/N
Catalytic Converter
De Ville/Fleetwood
25104174
Catalytic Converter
De Ville Touring
25103959
Catalytic Converter
Eldorado/Seville
25104175
BROUGHAMS AND CIMARRONS
If proper vehicle operation is verified and the odor condition persists, install a new catalytic converter using the part numbers listed below.
1986-1987 Brougham (Federal Emissions)
25103919
1986-1987 Brougham (California Emissions)
25103918
1986 Cimarron
25104705
1987 Cimarron
25104025
WARRANTY INFORMATION
For warranty purposes, use Labor Operation T5141 at:
-
.8 hour for De Villes and Fleetwoods
-
.6 hour for Eldorados and Sevilles
-
.8 hour for Broughams
-
.3 hour for Cimarrons