Fleetwood FWD V8-252 4.1L (1986)
Figure 1
Input housing end play should be checked during any overhaul. Excessive end play could cause too much lubrication fluid to leak out between the input
housing thrust washer/bearing and third roller clutch cam. Some leakage is designed in, but too much leakage could cause a durability concern. Refer to
the lubrication circuit fluid flow description, Figure 1.
6. INPUT/REACTION CARRIER LUBE DAM
The lube dam must be installed on most 1986 and newer models between the input and reaction carriers. Leaving a worn, damaged, or missing lube dam