Fleetwood FWD V8-300 4.9L (1993)
Keyless Entry Module: Service and Repair
Keyless Entry Module
REMOVE OR DISCONNECT
1. Negative battery cable.
2. I/P compartment door.
3. Screws holding module.
4. Electrical connectors.
INSTALL OR CONNECT
1. Electrical connectors.
2. Screws holding module and tighten to 1.5 Nm (13 in lbs).
3. I/P compartment door.
4. Negative battery cable and tighten to 15 Nm (11 ft lbs).
5. Program module.